top of page

Load data for .221 Rem. Fireball + .224 | 50gr | Fox Classic Hunter

Recommended Powder(s):

.221 Rem. Fireball + .224 | 50gr | Fox Classic Hunter

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 50gr | Fox Classic Hunter
Manufacturer SKU:
5.6 mm (0.224) - 45 gr
Bullet Weight:
50gr | 3.2g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.807" | 20.5mm
Caliber:
.221 Rem. Fireball load data
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
1.803" | 45.8mm
Seated Depth:
0.401" | 10.2mm
Shank Seated Depth:
0.401" | 10.2mm
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B7101_C125
Last updated:
2025-01-01

Load data for 26 loads in caliber .221 Rem. Fireball with .224 | 50gr | Fox Classic Hunter bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
85%
41307
89%
**00
99%
ADI AR 2207
<<locked>>
96%
35114
76%
**69
96%
[Alliant Reloder-7]*
<<locked>>
96%
37231
80%
**43
93%
Hodgdon TrailBoss
<<locked>>
97%
26107
56%
**62
100%
IMR 4227
<<locked>>
91%
39842
86%
**56
96%
[Lovex D060]*
<<locked>>
85%
40799
88%
**82
94%
Lovex S053 👍
<<locked>>
93%
39929
86%
**76
99%
ReloadSwiss RS 14
<<locked>>
92%
23772
51%
**59
100%
ReloadSwiss RS 36
<<locked>>
93%
39581
85%
**95
96%
SNPE Vectan BA6 1/2
<<locked>>
95%
39059
84%
**51
100%
[Shooters World Buffalo Rifle]*
<<locked>>
85%
40799
88%
**82
94%
Vihtavuori N110
<<locked>>
88%
40538
87%
**56
100%
Vihtavuori N120
<<locked>>
96%
32198
69%
**57
97%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
36695
79%
**05
99%
[ADI AR 2207]*
<<locked>>
83%
23076
50%
**08
90%
[Alliant Reloder-7]*
<<locked>>
90%
31256
67%
**02
91%
Hodgdon TrailBoss
<<locked>>
86%
21886
47%
**57
100%
[IMR 4227]*
<<locked>>
81%
29269
63%
**00
92%
[Lovex D060]*
<<locked>>
81%
36434
79%
**80
93%
Lovex S053
<<locked>>
81%
27673
60%
**87
96%
ReloadSwiss RS 14
<<locked>>
81%
19841
43%
**50
100%
[ReloadSwiss RS 36]*
<<locked>>
81%
27775
60%
**00
91%
SNPE Vectan BA6 1/2
<<locked>>
82%
27006
58%
**92
100%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
36434
79%
**80
93%
Vihtavuori N110
<<locked>>
81%
33272
72%
**08
100%
[Vihtavuori N120]*
<<locked>>
81%
21393
46%
**13
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page